Yinrui automatic glass storage system is composed of shuttle, glass frame, storage rack, loading position, patch position, protective fence and control system. It can be connected with ERP and MES data for real-time inventory exchange.
The shuttle system is designed to supply multiple glass sheet on the cutting line. Through the movement of the shuttle car in X and Y directions, the glass stand can be put into storage, put out of storage, put on the stand. After the glass size, thickness, film system and other relevant information are entered into the database, the data in the storage area and the data in the general control center are synchronized and shared to achieve real-time update of information.
Product features:
1. Improve the optimization rate: the glass in the raw glass warehouse can participate in the optimization at the same time, and the optimization rate of glass cutting can be increased by more than 3%;
2. The system is stable and the positioning is accurate: the glass base frame adopts the full closed-loop control system of servo and laser ranging, the Siemens control system and the efficient and stable PN communication to ensure the accuracy of the information, and it does not need to return to zero after the operation is interrupted, and the walking position accuracy can reach ± 1mm;
3. Modular glass base frame: realize rapid installation, reduce the impact of ground settlement, ensure long-term stable operation and facilitate equipment maintenance. The glass base frame in the storage area adopts a mechanical locking mechanism, which can prevent the glass base frame from moving and causing safety accidents.
|
Shuttle speed
|
40m/min
|
|
Traction speed
|
20m/min
|
|
Working cycle
|
Less than 45s each
|
|
Single glass rack bearing
|
12.5 T
|
|
Glass rack depth
|
220/320/400/450mm
|
If you add the automatic glass storage system for the glass cutting line, the efficiency will be higher.
